Presentations

Small Electron Beam Accelerators

B. Laurell, E. Föll

Presentation at RadTech Europe 2013 Exhibition & Conference for Radiation Curing. 15-17 October 2013. Basel / Switzerland

Foreword

This presentation gives an overview of the current state of industrial electron beam development.
It is not possible to present all of the technical details which one might wish because of the need to protect the proprietary interests of the firms engaged in the production applications and technology development. Still, the general view can be seen clearly. 

pdfDownload Small Electron Beam Accelerators (pdf)

  

Electron Beam Accelerators for New Application

B. Laurell, E. Föll

Presentation at RadTech Europe 2011 Exhibition & Conference for Radiation Curing. 18-20 October 2011. Basel / Switzerland

Foreword

The purpose of this presentation is to give an overview of the current state of industrial electron. The purpose of this presentation is to give an overview of the current state of industrial electronbeam development. It is not possible to present all of the technical details which one might wishbecause of the need to protect the proprietary interests of the firms engaged in the productionapplications and technology development. Still, the general view can be seen clearly.

pdfDownload Electrom Beam Accelerators for New Application (pdf)

 

Dosimeter overview and the use of Dµ for Calibration

B. Laurell, E. Föll

Presentation at RadTech Europe 2009 Exhibition & Conference for Radiation Curing. 14-15 October 2009. Nice / France

Introduction

Irradiation with low-energy electrons (75 - 300 keV) results in dose gradients across the thickness of the dosimeters that are typically used for dose measurement at these energies. This leads to different doses being measured with different dosimeter thicknesses irradiated at the same energy, resulting in difficulties in providing traceable dose measurements using regerence dosimeters. This paper will discuss different dosimeter systems and how to use th Dµ to calibrate and measure does from low energy electron irradiations with measurement traceability to national standards. 

pdfDownload Dosimeter overview and the use of Dµ for Calibration (pdf) 

 

New Developments Of Electron Beam Accelerators

T. Lund, B. Laurell, E. Föll

Presentation at RadTech Europe 2009 Exhibition & Conference for Radiation Curing. 14-15 October 2009. Nice / France

Foreword

The purpose of this presentation is to present an overview of the present state of industrial electron beam development. It is not possible to present all of the technical details which one might wish because of the need to protect the proprietary interests of the firms engaged in the production applications and technology development. Still, the general view can be seen clearly.

pdfDownload New Developments Of Electron Beam Accelerators (pdf)

 

New Multi Purpose Laboratory Electron Beam Equipment

B. Laurell, E. Föll

Presentation at RadTech Europe 2007 Exhibition & Conference for Radiation Curing. 13-15 November 2007. Vienna / Austria

Introduction

More environmental protection requirements force users of solvent-based coatings to look for an environmentally safe procedure that emits considerably less solvents or cracked products into the atmosphere and water.

Also the new EC Super directive regarding migration of less then 10 ppb into the food will force the packaging producer to look for new technologies.

The chemistry has new groups of products to offer:
- Systems with low content of solvents and with high solid contents
- Coating materials containing water
- Coatings with solid resin in powder form
- 100 % solid systems.

pdfDownload New Multi Purpose Laboratory Electron Beam Equipment (pdf)

 

Electron Beam Technology and coatings

B. Laurell, E. Föll

Presentation at AK-Sitzung. June 2006. FH-München

Introduction

More environmental protection requirements force users of solvent-based coatings to look for an environmentally safe procedure that emits considerably less solvents or cracked products into the atmosphere and water.

Also the new EC Super directive regarding migration of less then 10 ppb into the food will force the packaging producer to look for new technologies.

The chemistry has new groups of products to offer:
- Systems with low content of solvents and with high solid contents
- Coating materials containing water
- Coatings with solid resin in powder form
- 100 % solid systems.

pdfDownload Electron Beam Technology and coatings (pdf)

 

Industrial Application of Electron Beam Curing in the Field of Coatings

B. Laurell, E. Föll

Presentation at RadTech Europe. 29-31 January 2003. Berlin / Germany.

Introduction

There is an ever-increasing demand for solvent-free systems for surfaces coating. During the curing process there should be no emission of harmful substances into the atmosphere or water. In addition, after the curing process is over, there should be no odour emissions from the surface.

These two requirements are already making Electron Beam curing (EB) the focus of ever more attention, not least because this technology has been used for a wide variety of applications in recent years due to the many other benefits it offers.

EB is the abbreviation for a environmentally safe, heat and solvent free technique: Electron-Beam curing.

Nevertheless, success is only possible if the user, the chemical supplier and the plant manufacturer collaborate fully - not only during the planning phase but also in the construction of the curing line and later during initial operation. 

pdfDownload Industrial Application of Electron Beam Curing in the Field of Coatings (pdf)